48" Acrylic Plastic PVC Bender, 110V 1500W Plastic Sheet Bender Manual Strips Heater Hot Heating Bender Tool 1-6MM Thickness Effective Heating Length 1220 MM for Sign Making

Specifications:Input Voltage: Ac 110VHeating Peak: Zw-300 420 ℃, The Other 250 ℃Heating Bending Thickness: 1-6mmHeating Port Width: 8mmEffective Heating Length: 1220 MmPower: 1500WProduct Size：Approx.135x4x4cm/53.1x1.6x1.6inNet Weight:4kgGross Weight: 4.5kgPackage Dimensions (L x W x H): 147x20x12cmInstructions:Keep a cooling tank of more than 30 liters. First, connect the heater body and the submersible pump with a silicone hose. Place the submersible pump in the cooling bucket, connect the power supply of the pump, and wait for the water to circulate out. (Note: The water temperature of the machine will keep rising for a long time. Please replace the cold water clearly. The temperature of the circulating water should not drop abruptly. When the water temperature exceeds 50 degrees, the power supply of the heater should be cut off in time, and the circulating water should be replaced later).Connect the thermostat with the hot bender and connect it to 220V power supply. Adjust the knob of the thermostat controller. The clockwise direction is to raise the temperature, and vice versa. (Note: It is advisable to slowly adjust the thermostat to a reddish heat pipe. Excessive temperature will cause damage to the hot bending material and affect the service life of the hot bender).When the heating pipe reaches the required temperature, it can place the plastic sheet which needs to be hot-bended on the heating trough. According to the different materials, the setting time is different. Please determine the setting time according to the actual situation.Packing List:1 x Acrylic Pvc Bending Machine Heater1 x Water Pump2 x Silicone Tubes1 x Temperature Controller1 x Water Thermometer

• 【High Quality】Input Voltage: Ac 110V; Heating Peak: Zw-300 420 ℃, The Other 250 ℃; Heating Bending Thickness: 1-6mm; Heating Port Width: 8mm; Effective Heating Length: 1220 Mm; Power: 1500W. This acrylic PVC plastic bender was made of superior material, which is durable as well as durable lightweight.
• 【Light & Practical】-Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm. If bending thick plates, slotting bending, bending angle will be more beautiful, you can adapt to local conditions, flexible use.
• 【Temperature Adjustable】-Product Temperature Is Uniform, Water Circulation Cooling. Can Be Heated Up And Down Simultaneously By Two Heaters. Can Be Combined With Multiple Heaters To Heat Multiple Bending Points At One Time. Can Be Combined With The Worktable Into a Hot Bending Machine, Can Also Be Used Alone.
• 【Water Circulation Cooling】-There is water circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed. Power Supply And Water Pipe Are Connected At Both Ends Respectively.
• 【Wide Application】This heater bending machine is widely used in decoration engineering, sign making, display cabinets, aquarium packaging, lighting led channel characters, supermarket shelves, curtain walls, large light boxes, to heat and bend acrylic, organic board, PVC and various thermoplastic materials.